knx presence detector

لوحة ذكية ABB KNX مع كشف الحركة الأفقية بأربع قنوات (0-180 درجة). لتمكين الإضاءة القائمة على الحضور وأتمتة الطاقة. تركيب وحدات للمباني التجارية والسكنية. جودة معتمدة وقابلية التشغيل التفاعلي KNX.

MTN619425 الروك لوحدة الضغط على زر Merten System M 1-gang. تتميز بأسهم لأعلى/لأسفل للتحكم في الأعمى/الغالق، ولمسة نهائية لامعة بيضاء نشطة، وتكامل KNX مثالي مع وحدة MTN625199 لأتمتة المباني الذكية.

5WG1258-7EB01 KNX Surface Mounting Enclosure for UP 258 UP 255 White The 5WG1258-7EB01 (AP 258E01) is a surface mounting enclosure designed to convert flush-mount KNX presence detectors and brightness sensors into surface-mount installations. Product Overview This enclosure is compatible with the UP 258D12 and UP 258E22 presence detectors as well as the UP 255D21 brightness sensor. When structural constraints prevent recessed back-box installation — such as solid concrete

S 255/11 IR Remote Control 6 Pushbutton Pairs for KNX Detectors 5WG1255-7AB11 Product Overview This infrared remote provides wireless operation of KNX presence detectors and brightness sensors without additional bus wiring or wall panels. Featuring six pushbutton pairs, it enables users to override lighting scenes, adjust dimming, control shutter/blind positions, and activate preset scenes from anywhere in the room. Each pair is independently parameterizable via ETS —

5WG1255-2DB21 KNX Brightness Sensor with Constant Light Controller 5-CH Product Overview The 5WG1255-2DB21 (UP 255D21) is a KNX brightness sensor with integrated constant light level controller, designed for ceiling installation. Unlike presence detectors, its primary function is precise illuminance measurement via reflected light from the working plane below, with a range of 0–2,000 lux. It supports mixed-light measurement to distinguish between daylight and artificial light

RDF600KN/VB Flush Mount KNX Room Thermostat for 2/4-Pipe FCU | Black Product Overview The RDF600KN/VB is a black-finish KNX flush-mount room thermostat designed for 2-pipe and 4-pipe fan coil unit systems. It provides on/off outputs for valve and fan actuators through the KNX bus at AC 230 V. Two universal inputs accept external digital and analogue signals from keycard switches, return air sensors, window contacts, presence detectors, and heat/cool changeover devices.

5WG15341DB61 KNX Switch Actuator N534D61 12Ch 16A 20AX 230V The 5WG1534-1DB61 (N 534D61) is a 12-channel KNX switching actuator rated for AC 230 V circuits at 16 AX / 20 AX (200 µF capacitive / fluorescent lamp load), designed for DIN rail installation in electrical distribution boards. It receives switching commands from KNX bus devices and independently switches up to 12 independent 230 V AC circuits, serving as the core actuator component for KNX-controlled

RDF600KN Flush Mount KNX Room Thermostat 2/4-Pipe FCU On/Off Output + 2 Universal Inputs Round/Square Conduit Boxes S55770-T293 Product Overview The RDF600KN is a flush-mount KNX room thermostat designed for 2-pipe and 4-pipe fan coil unit systems. It provides on/off outputs for valve actuators and fan stages through the KNX automation network. Two universal inputs accept external sensors such as keycard contacts, return air temperature probes, window contacts, presence

RDF600KN/S Flush Mount KNX Room Thermostat for 2/4-Pipe FCU | 4-Button Light/Blind Switch + 2 Universal Inputs S55770-T400 Product Overview The RDF600KN/S extends the KNX FCU thermostat by integrating a switching group with four physical push buttons for local lighting and blind control. This hybrid design combines temperature regulation, fan speed, light toggling, and blind operation in one wall unit, eliminating separate KNX button modules per room. Two universal inputs