0 10v damper actuator

8751029000 Schneider Non-Spring Return Damper Actuator 24V 20Nm 0-10V New Product Overview The Schneider Electric Non-Spring-Return Damper Actuator (Part No. 8751029000) combines 20 Nm high torque with 0-10V proportional modulating control, manual override, and position feedback making it the most capable non-spring-return actuator in this series for large precision-controlled damper applications. Technical Specifications Part Number 8751029000 Power Supply 24 VAC Torque 20

8751019000 Schneider Non-Spring Return Damper Actuator 24V 10Nm 0-10V New Product Overview The Schneider Electric Non-Spring-Return Damper Actuator (Part No. 8751019000) provides 10 Nm torque with 0-10V proportional control, manual override, and position feedback designed for medium-to-large HVAC dampers requiring precise modulating control in commercial building automation. Technical Specifications Part Number 8751019000 Power Supply 24 VAC Torque 10 Nm Control Signal 0

8751009000 Schneider Non-Spring Return Damper Actuator 24V 5Nm 0-10V New The Schneider Electric Non-Spring-Return Damper Actuator (Part No. 8751009000) is a 24V AC non-fail-safe damper actuator with 5 Nm torque output, 0-10V analogue control, manual override, and position feedback designed for modulating HVAC damper control in building automation systems. Key Specifications Part Number: 8751009000 Power Supply: 24 VAC Torque: 5 Nm Control Signal: 0-10V DC (proportional

SXWAO8XXX10001 Schneider AO-8 8 Channel Analog Output 0-10V 4-20mA Module The Schneider Electric AO-8 8-Channel Analog Output Module delivers independently configurable 0-10V voltage or 0-20mA/4-20mA current output per channel for precise proportional control in industrial applications. Key Features 8 independent analog output channels Configurable per channel: 0-10V voltage or 0-20mA/4-20mA current output Individual scaling and offset calibration for each channel Fail-safe

L5504AMP - C-Bus 4-Channel Analogue Output Unit, 0-10V DC DIN Rail Mount for LED Ballasts The L5504AMP is a C-Bus 4-channel analogue output module that provides a 0-10V DC variable voltage output proportional to C-Bus network commands. Designed specifically for controlling electronic ballasts and LED drivers with 0-10V or 1-10V dimming interfaces, this module bridges the gap between C-Bus automation and modern dimmable lighting technologies. Each channel can source or sink

MNL-V2RV3-2 Schneider VAV LonMark Controller - Building Automation Product Overview The Schneider Electric VAV LonMark Controller MNL-V2RV3-2 is a LonMark-certified, dual-duct or heating/cooling VAV terminal unit controller providing bi-directional airflow control for VAV boxes equipped with reheat or dual-duct mixing configurations in commercial HVAC systems. Key Specifications Part Number: MNL-V2RV3-2 Protocol: LonWorks (LON TP/FT-10), LonMark certified Control Mode:

MNL-V1RV3-2 Schneider Cooling Only LonMark VAV Controller Product Overview The Schneider Electric Cooling Only LonMark VAV Controller MNL-V1RV3-2 is a LonMark-certified, single-duct cooling-only variable air volume terminal unit controller designed to regulate room temperature by modulating VAV box airflow in commercial building HVAC systems. Brand new, original Schneider Electric product. Key Specifications Part Number: MNL-V1RV3-2 Protocol: LonWorks (LON TP/FT-10), LonMark

SXWAOV8XX10001 Schneider AO-V-8 8-Channel Analog Output Voltage New The Schneider Electric AO-V-8 Analogue Output Module (Part No. SXWAOV8XX10001) provides 8 isolated 0-10V analogue output channels to expand the control capacity of SmartX AS-P and AS-B controllers. This enables direct proportional control of variable-speed drives, actuators, and analogue-input field devices. Key Specifications Part Number SXWAOV8XX10001 Output Channels 8 0-10V DC analogue output Output

MNB-V1-2 Schneider MN VAV BACnet Controller Building Automation New The Schneider Electric MN VAV BACnet Controller MNB-V1-2 is a BACnet MS/TP-compliant single-duct cooling-only VAV terminal unit controller, delivering open-protocol interoperability for VAV box control in modern commercial building automation systems. Key Specifications Part Number: MNB-V1-2 Protocol: BACnet MS/TP (ASHRAE 135, BTL-listed) Control: Cooling only, single-duct VAV Damper Output: 0-10V to damper