knx presence sensor

5WG1258-2DB12 KNX PIR Presence Detector Brightness Sensor 360 Product Overview The 5WG1258-2DB12 (UP 258D12) is a KNX-bus-powered ceiling-mounted presence and motion detector with integrated brightness sensor, designed for intelligent lighting control, HVAC occupancy management, and building automation in commercial offices, conference rooms, classrooms, and open-plan workspaces. Communicating natively over the KNX/EIB bus, it requires no separate power supply

5WG1258-7EB01 KNX Surface Mounting Enclosure for UP 258 UP 255 White The 5WG1258-7EB01 (AP 258E01) is a surface mounting enclosure designed to convert flush-mount KNX presence detectors and brightness sensors into surface-mount installations. Product Overview This enclosure is compatible with the UP 258D12 and UP 258E22 presence detectors as well as the UP 255D21 brightness sensor. When structural constraints prevent recessed back-box installation — such as solid concrete

N 141/32 KNX DALI Gateway Twin 2 Lines Multi Master Controller 128 Devices DIN Rail 5WG1141-1AB32 Product Overview This twin-channel Multi-Master Gateway doubles across two independent DALI lines, each a full DALI-2 certified master with up to 64 ECGs, 8 presence sensors, and 8 brightness sensors — 128 devices total. Every channel delivers independent switching, dimming, Tunable White, RGB(W), logic functions, overrides, and per-address monitoring. Supports HCL schedules, DCA

S 255/11 IR Remote Control 6 Pushbutton Pairs for KNX Detectors 5WG1255-7AB11 Product Overview This infrared remote provides wireless operation of KNX presence detectors and brightness sensors without additional bus wiring or wall panels. Featuring six pushbutton pairs, it enables users to override lighting scenes, adjust dimming, control shutter/blind positions, and activate preset scenes from anywhere in the room. Each pair is independently parameterizable via ETS —

AP 258E01 Surface Mounting Enclosure White for Presence Detectors 5WG1258-7EB01 This white surface-mounting enclosure enables flush-mount KNX ceiling detectors to be installed on solid ceilings, exposed concrete, suspended grids, or any location where recessed conduit boxes are unavailable. It provides a clean architectural finish while maintaining full detection performance. Compatible Devices Designed specifically for the UP 258D12 (presence + brightness), UP 258E22

N 141/14 KNX DALI Gateway 1 Line Multi Master Controller This single-line gateway serves as a DALI Multi-Master Controller with DALI-2 certification, communicating with up to 64 DALI ECGs plus at least 8 presence and 8 brightness sensors per line. Each channel is independently controllable for switching, dimming, color temperature, and status feedback — with logic functions, overrides, night mode, failure reporting per group/address. Supports Tunable White/RGB(W) via DCA.

RDF600KN/VB Flush Mount KNX Room Thermostat for 2/4-Pipe FCU | Black Product Overview The RDF600KN/VB is a black-finish KNX flush-mount room thermostat designed for 2-pipe and 4-pipe fan coil unit systems. It provides on/off outputs for valve and fan actuators through the KNX bus at AC 230 V. Two universal inputs accept external digital and analogue signals from keycard switches, return air sensors, window contacts, presence detectors, and heat/cool changeover devices.

5WG15341DB61 KNX Switch Actuator N534D61 12Ch 16A 20AX 230V The 5WG1534-1DB61 (N 534D61) is a 12-channel KNX switching actuator rated for AC 230 V circuits at 16 AX / 20 AX (200 µF capacitive / fluorescent lamp load), designed for DIN rail installation in electrical distribution boards. It receives switching commands from KNX bus devices and independently switches up to 12 independent 230 V AC circuits, serving as the core actuator component for KNX-controlled

RDF600KN Flush Mount KNX Room Thermostat 2/4-Pipe FCU On/Off Output + 2 Universal Inputs Round/Square Conduit Boxes S55770-T293 Product Overview The RDF600KN is a flush-mount KNX room thermostat designed for 2-pipe and 4-pipe fan coil unit systems. It provides on/off outputs for valve actuators and fan stages through the KNX automation network. Two universal inputs accept external sensors such as keycard contacts, return air temperature probes, window contacts, presence