Kamersensoren

LSS10020033 Schneider ENOcean Kamertemperatuur Sensor 868MHz 0-40°C

LSS10020033 Schneider ENOcean Room Temperature Sensor 868MHz 0-40°C The Schneider Electric LSS10020033 is a wireless indoor room temperature sensor from the EcoStruxure Building Expert ENOcean series, operating at 868 MHz and measuring temperatures from 0 to 40°C. As a temperature-only sensor (compared to the LSS252331 which also measures humidity), it is the most cost-effective wireless temperature sensing solution in the EcoStruxure Building Expert ENOcean portfolio.

LSS442510 Schneider ENOcean draadloze CO2-temperatuurvochtigheidssensor 24V

LSS442510 Schneider ENOcean Wireless CO2 Temp Humidity Sensor 24V The Schneider Electric LSS442510 is a wireless indoor CO2, temperature, and humidity combined sensor from the EcoStruxure Building Expert ENOcean platform, operating on a 24 V power supply. Unlike the solar/battery-powered LSS252331, the LSS442510 is mains-powered at 24 V, enabling continuous CO2 measurement — which requires significantly more power than passive temperature or humidity sensing. The CO2

LSS252331 Schneider ENOcean draadloze temperatuur-vochtigheidssensor 868MHz zonne-energie

LSS252331 Schneider ENOcean Wireless Temp Humidity Sensor 868MHz Solar The Schneider Electric LSS252331 is a wireless room temperature and humidity sensor from the EcoStruxure Building Expert ENOcean platform. Operating on the self-powered ENOcean radio protocol at 868.3 MHz, it harvests energy from ambient light via a solar cell and an integrated backup battery, eliminating the need for power wiring entirely. It wirelessly transmits high-accuracy temperature (0–40°C, ±0.4°C)

MN-S4HT-500 Schneider MicroNet Temperatuurvochtigheidssensor Ventilator snelheidsregelaar

MN-S4HT-500 Schneider MicroNet Temp Humidity Sensor Fan Speed Controller The Schneider Electric MN-S4HT-500 is the most fully-featured sensor in the MicroNet MN-S series, integrating temperature sensing, humidity sensing, setpoint adjustment, override control, full Controller Mode Functions, On/Off/Auto switching, and fan speed selection into a single compact wall-mounted unit. The thermoset polymer capacitive humidity element provides excellent long-term accuracy stability.

MN-S4-500 Schneider MicroNet VAV-sensor instelpuntoverride controllermodus

MN-S4-500 Schneider MicroNet VAV Sensor Setpoint Override Controller Mode The Schneider Electric MN-S4-500 is the direct replacement for the legacy MN-S4 MicroNet sensor, adding full Controller Mode Functions to the setpoint and override capabilities of the MN-S3-500. In addition to temperature sensing and local setpoint adjustment, the MN-S4-500 enables occupants to select HVAC system operating modes (Heat, Cool, Off, Auto) and fan speed levels (Low, Medium, High, Auto)

MN-S3HT-500 Schneider MicroNet temperatuur-vochtigheidssensor LCD-instelpuntoverbrugging

MN-S3HT-500 Schneider MicroNet Temp Humidity Sensor LCD Setpoint Override The Schneider Electric MN-S3HT-500 is a dual-sensing wall-mounted room sensor monitoring both temperature and relative humidity for VAV HVAC zone control. Built on the MicroNet S-Link platform, it incorporates a precision thermistor for temperature and a thermoset polymer capacitive element for humidity — a sensor technology chosen for its superior long-term stability and resistance to drift compared to

MN-S3-500 Schneider MicroNet VAV-sensor Setpoint Override LCD-display

MN-S3-500 Schneider MicroNet VAV Sensor Setpoint Override LCD Display The Schneider Electric MN-S3-500 (MicroNet series, formerly Barber-Colman) is a wall-mounted digital room temperature sensor combining a precision thermistor with a three-button interface and LCD display, providing occupants with local setpoint adjustment and override control for VAV HVAC zones. It communicates with MicroNet VAV box controllers via the S-Link proprietary bus — a two-wire power-and-data