ルームセンサー

LSS10020033 シュナイダー ENOcean 室温センサー 868MHz 0-40°C

LSS10020033 Schneider ENOcean Room Temperature Sensor 868MHz 0-40°C The Schneider Electric LSS10020033 is a wireless indoor room temperature sensor from the EcoStruxure Building Expert ENOcean series, operating at 868 MHz and measuring temperatures from 0 to 40°C. As a temperature-only sensor (compared to the LSS252331 which also measures humidity), it is the most cost-effective wireless temperature sensing solution in the EcoStruxure Building Expert ENOcean portfolio.

LSS442510 シュナイダー ENOcean 無線CO2温度湿度センサー 24V

LSS442510 Schneider ENOcean Wireless CO2 Temp Humidity Sensor 24V The Schneider Electric LSS442510 is a wireless indoor CO2, temperature, and humidity combined sensor from the EcoStruxure Building Expert ENOcean platform, operating on a 24 V power supply. Unlike the solar/battery-powered LSS252331, the LSS442510 is mains-powered at 24 V, enabling continuous CO2 measurement — which requires significantly more power than passive temperature or humidity sensing. The CO2

LSS252331 シュナイダー ENOcean 無線温度湿度センサー 868MHz 太陽光

LSS252331 Schneider ENOcean Wireless Temp Humidity Sensor 868MHz Solar The Schneider Electric LSS252331 is a wireless room temperature and humidity sensor from the EcoStruxure Building Expert ENOcean platform. Operating on the self-powered ENOcean radio protocol at 868.3 MHz, it harvests energy from ambient light via a solar cell and an integrated backup battery, eliminating the need for power wiring entirely. It wirelessly transmits high-accuracy temperature (0–40°C, ±0.4°C)

MN-S4HT-500 シュナイダー MicroNet 温度湿度センサーファン速度コントローラー

MN-S4HT-500 Schneider MicroNet Temp Humidity Sensor Fan Speed Controller The Schneider Electric MN-S4HT-500 is the most fully-featured sensor in the MicroNet MN-S series, integrating temperature sensing, humidity sensing, setpoint adjustment, override control, full Controller Mode Functions, On/Off/Auto switching, and fan speed selection into a single compact wall-mounted unit. The thermoset polymer capacitive humidity element provides excellent long-term accuracy stability.

MN-S4-500 シュナイダーマイクロネット VAV センサーセットポイントオーバーライドコントローラーモード

MN-S4-500 Schneider MicroNet VAV Sensor Setpoint Override Controller Mode The Schneider Electric MN-S4-500 is the direct replacement for the legacy MN-S4 MicroNet sensor, adding full Controller Mode Functions to the setpoint and override capabilities of the MN-S3-500. In addition to temperature sensing and local setpoint adjustment, the MN-S4-500 enables occupants to select HVAC system operating modes (Heat, Cool, Off, Auto) and fan speed levels (Low, Medium, High, Auto)

MN-S3HT-500 シュナイダー MicroNet 温度湿度センサー LCD 設定値オーバーライド

MN-S3HT-500 Schneider MicroNet Temp Humidity Sensor LCD Setpoint Override The Schneider Electric MN-S3HT-500 is a dual-sensing wall-mounted room sensor monitoring both temperature and relative humidity for VAV HVAC zone control. Built on the MicroNet S-Link platform, it incorporates a precision thermistor for temperature and a thermoset polymer capacitive element for humidity — a sensor technology chosen for its superior long-term stability and resistance to drift compared to

MN-S3-500 シュナイダー MicroNet VAV センサー設定値オーバーライド LCD ディスプレイ

MN-S3-500 Schneider MicroNet VAV Sensor Setpoint Override LCD Display The Schneider Electric MN-S3-500 (MicroNet series, formerly Barber-Colman) is a wall-mounted digital room temperature sensor combining a precision thermistor with a three-button interface and LCD display, providing occupants with local setpoint adjustment and override control for VAV HVAC zones. It communicates with MicroNet VAV box controllers via the S-Link proprietary bus — a two-wire power-and-data