knx presence detection sensor

Le bouton-poussoir à 5 touches Schneider Unica KNX avec thermostat combine le contrôle de l'éclairage et du CVC dans un seul panneau. Comprend 5 touches personnalisables, un contrôle précis de la température, une compatibilité KNX TP1 et une finition blanc brillant. Gain de place grâce à une durabilité de qualité industrielle pour les systèmes intelligents compacts.

Panneau Schneider Unica KNX à 5 touches avec thermostat en argent. Combine le contrôle de scène et la régulation précise de la température dans une seule unité peu encombrante. Protocole KNX TP1, durée de vie de la presse de plus de 100 000, classement au feu V0. Idéal pour les appartements de luxe et les espaces commerciaux de charme.

Le thermostat Schneider Cuadro H KNX offre un contrôle précis de la température de ± 0,5 °C avec une programmation sur 7 jours et une liaison avec le système CVC. Présente un design minimaliste blanc satiné, une protection antigel et une compatibilité avec le protocole KNX TP1 pour un zonage intelligent dans les espaces résidentiels et commerciaux. L'automatisation économe en énergie réduit les coûts de 15 à 20 %.

5WG1258-2DB12 KNX PIR Presence Detector Brightness Sensor 360 Product Overview The 5WG1258-2DB12 (UP 258D12) is a KNX-bus-powered ceiling-mounted presence and motion detector with integrated brightness sensor, designed for intelligent lighting control, HVAC occupancy management, and building automation in commercial offices, conference rooms, classrooms, and open-plan workspaces. Communicating natively over the KNX/EIB bus, it requires no separate power supply

N 141/32 KNX DALI Gateway Twin 2 Lines Multi Master Controller 128 Devices DIN Rail 5WG1141-1AB32 Product Overview This twin-channel Multi-Master Gateway doubles across two independent DALI lines, each a full DALI-2 certified master with up to 64 ECGs, 8 presence sensors, and 8 brightness sensors — 128 devices total. Every channel delivers independent switching, dimming, Tunable White, RGB(W), logic functions, overrides, and per-address monitoring. Supports HCL schedules, DCA

5WG1255-2DB21 KNX Brightness Sensor with Constant Light Controller 5-CH Product Overview The 5WG1255-2DB21 (UP 255D21) is a KNX brightness sensor with integrated constant light level controller, designed for ceiling installation. Unlike presence detectors, its primary function is precise illuminance measurement via reflected light from the working plane below, with a range of 0–2,000 lux. It supports mixed-light measurement to distinguish between daylight and artificial light

AP 258E01 Surface Mounting Enclosure White for Presence Detectors 5WG1258-7EB01 This white surface-mounting enclosure enables flush-mount KNX ceiling detectors to be installed on solid ceilings, exposed concrete, suspended grids, or any location where recessed conduit boxes are unavailable. It provides a clean architectural finish while maintaining full detection performance. Compatible Devices Designed specifically for the UP 258D12 (presence + brightness), UP 258E22

MTN630919 SpaceLogic KNX Light-Sensing Presence Detector Constant Lux Control White The Light + PIR Presence Detector with Coupler is a multi-function intelligent sensing device combining passive infrared human detection and ambient light level detection. Supports constant illuminance control mode that automatically adjusts artificial lighting based on natural light changes, achieving perfect balance between energy saving and comfort. Built-in KNX coupler for easy installatio

N 141/21 KNX DALI-2 Gateway Twin Plus 2 Channels 128 ECG Emergency Lighting RGBW 5WG1141-1AB21 This KNX/DALI gateway twin plus offers two independent DALI channels, each supporting up to 64 electronic control gears for a total of 128 devices across 32 groups. Both channels are DALI-2 certified per IEC 62386-101 and 103 standards. Technical Specifications DALI Channels 2 independent channels Device Capacity 64 devices per channel (128 total) Group Support 32 groups total