knx presence detection sensor

El pulsador Schneider Unica KNX de 5 teclas con termostato combina control de iluminación/HVAC en un solo panel. Cuenta con 5 teclas personalizables, control de temperatura de precisión, compatibilidad KNX TP1 y acabado blanco brillante. Ahorra espacio con durabilidad de grado industrial para sistemas inteligentes compactos.

Placa Schneider Unica KNX de 5 teclas con termostato en color plata. Combina control de escena y regulación precisa de la temperatura en una unidad que ahorra espacio. Protocolo KNX TP1, vida útil de la prensa superior a 100 000, clasificación contra incendios V0. Ideal para apartamentos de lujo y espacios comerciales boutique.

El termostato Schneider Cuadro H KNX ofrece control de temperatura de precisión de ±0,5 °C con programación de 7 días y conexión al sistema HVAC. Presenta un diseño minimalista en blanco satinado, protección anticongelante y compatibilidad con el protocolo KNX TP1 para una zonificación inteligente en espacios residenciales y comerciales. La automatización que ahorra energía reduce los costos entre un 15% y un 20%.

5WG1258-2DB12 KNX PIR Presence Detector Brightness Sensor 360 Product Overview The 5WG1258-2DB12 (UP 258D12) is a KNX-bus-powered ceiling-mounted presence and motion detector with integrated brightness sensor, designed for intelligent lighting control, HVAC occupancy management, and building automation in commercial offices, conference rooms, classrooms, and open-plan workspaces. Communicating natively over the KNX/EIB bus, it requires no separate power supply

N 141/32 KNX DALI Gateway Twin 2 Lines Multi Master Controller 128 Devices DIN Rail 5WG1141-1AB32 Product Overview This twin-channel Multi-Master Gateway doubles across two independent DALI lines, each a full DALI-2 certified master with up to 64 ECGs, 8 presence sensors, and 8 brightness sensors — 128 devices total. Every channel delivers independent switching, dimming, Tunable White, RGB(W), logic functions, overrides, and per-address monitoring. Supports HCL schedules, DCA

5WG1255-2DB21 KNX Brightness Sensor with Constant Light Controller 5-CH Product Overview The 5WG1255-2DB21 (UP 255D21) is a KNX brightness sensor with integrated constant light level controller, designed for ceiling installation. Unlike presence detectors, its primary function is precise illuminance measurement via reflected light from the working plane below, with a range of 0–2,000 lux. It supports mixed-light measurement to distinguish between daylight and artificial light

AP 258E01 Surface Mounting Enclosure White for Presence Detectors 5WG1258-7EB01 This white surface-mounting enclosure enables flush-mount KNX ceiling detectors to be installed on solid ceilings, exposed concrete, suspended grids, or any location where recessed conduit boxes are unavailable. It provides a clean architectural finish while maintaining full detection performance. Compatible Devices Designed specifically for the UP 258D12 (presence + brightness), UP 258E22

MTN630919 SpaceLogic KNX Light-Sensing Presence Detector Constant Lux Control White The Light + PIR Presence Detector with Coupler is a multi-function intelligent sensing device combining passive infrared human detection and ambient light level detection. Supports constant illuminance control mode that automatically adjusts artificial lighting based on natural light changes, achieving perfect balance between energy saving and comfort. Built-in KNX coupler for easy installatio