MTN6700-0104 Schneider Electric SpaceLogic KNX Hybrid Switch Actuator 4-Channel 10A Manual Mode

Sometimes the perfect smart-room design starts with a single actuator. The Schneider Electric MTN6700-0104 belongs to the SpaceLogic KNX hybrid switch actuator family: a REG-K DIN-rail module that brings four independent 230 V switching channels into one compact device. Each channel is a relay-based make contact rated at 10 A, which is ample for lighting groups, socket outlets or small appliances in a living room, hotel guest room or meeting room. Because the relay handles the load directly, the module needs no additional power pack and works with any certified KNX power supply on the bus.

What makes this actuator "hybrid" is the marriage of bus-controlled operation with a per-channel manual rocker. There are always moments in a real installation when local operation matters: during commissioning, after a bus failure, or when a housekeeper or site technician must turn a circuit on or off on the spot. With the MTN6700-0104, every output can be operated by hand directly on the front of the module. This built-in manual mode is the reason engineers choose the hybrid series: the device behaves as a normal automatic KNX actuator, yet it never leaves the user trapped by a dead bus or an unprogrammed network.

Like every device in the SpaceLogic KNX range, the actuator is configured with the ETS engineering tool, so it integrates seamlessly with push buttons, presence detectors, timers, touch panels and building-management controllers from any KNX manufacturer. The application software covers the functions a serious switch actuator must deliver: ON/OFF switching with optional status feedback, staircase lighting with switch-off warning, delay and timer functions, scene recall for moods such as "welcome", "away" or "cleaning", logic links between channels, and blocking or priority inputs that let a central controller or BMS override local commands. Behaviour on bus voltage failure and recovery is programmable channel by channel, and a green LED confirms when the application has been loaded and the device is ready for operation.

Typical projects for the MTN6700-0104 are apartments and villas where four circuits manage the lighting and socket groups of one living area or entrance zone, hotels that standardise their guest-room electrical control, and small offices or clinics. Mounting takes place on a standard EN 50022 DIN rail inside the distribution board, which keeps all power wiring centralised and tidy. No separate data rail is required: the KNX bus is connected through the supplied bus terminal, and loads are terminated with robust screw terminals.

For distributors, panel builders and system integrators, the MTN6700-0104 is a dependable building block that is easy to stock, easy to wire and easy to explain to an end customer. Genuine Schneider Electric quality, KNX certification, a comfortable 10 A per channel, a space-saving white REG housing and the practical manual mode combine into a product that solves real problems on site. If your project calls for a compact four-channel start point for intelligent lighting and socket control, this actuator deserves a place on your BOM.