Français
Deutsch
Italiano
Русский
Español
Português
Nederlandse
Ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
Indonesia
Tiếng Việt
ไทย
বাংলা
فارسی
Polski
SXWIPIOAA10001 Schneider SmartX IP-IO-DI10 I/O Module Brand New
The Schneider Electric SmartX IP-IO-DI10 (Part No. SXWIPIOAA10001) is an IP-connected 10-channel digital input remote I/O module for EcoStruxure Building Operation. This module enables distributed monitoring of digital field devices over Ethernet without running field wiring back to the main control panel.
| Part Number | SXWIPIOAA10001 |
|---|---|
| I/O Type | 10 × Digital Inputs (DI) |
| Communication | BACnet/IP over Ethernet |
| Power Supply | PoE (Power over Ethernet) or 24 VDC |
| Mounting | DIN Rail |
| Compatibility | EcoStruxure Building Operation, SmartX |
This module is deployed in large buildings, campuses, and industrial facilities where digital monitoring points (pump status, valve open/closed, alarm contacts, door switches) are located far from the main BAS panel. IP-IO modules eliminate long cable runs from remote plant rooms or rooftop equipment to the main panel, reducing installation cost and cable management complexity. Each module extends the I/O reach of any SmartX controller over the building's IP network.
SmartX IP-IO-DI10 I/O Module
,DI10 I/O Module
,Schneider SXWIPIOAA10001
Ms. Nora
Sales Manager
- Email: nora@knxcomponents.com
- Tel: +8613427540176
- WhatsApp: 8613427540176
-
WeChat:
idainchina518
-
N 536D31 KNX Switch Dim Actuator 4x AC 230V 10AX 1-10V Output Relay DIN Rail 5WG1536-1DB31
N 536D31 KNX Switch Dim Actuator 4x AC 230V 10AX 1-10V Output Relay DIN Rail 5WG1536-1DB31 This KNX switch/dim actuator provides four relay outputs for AC 230 V, 10 AX loads, plus a 1...10 V control voltage output per channel for dimming electronic ballasts and LED drivers. Key Specifications & ... -
RL 260/23 KNX Binary Input Module 4xAC/DC 12-230V DIN Rail Screw-less Terminals 5WG1260-4AB23
RL 260/23 KNX Binary Input Module 4xAC/DC 12-230V DIN Rail Screw-less Terminals 5WG1260-4AB23 The KNX binary input module provides four voltage inputs covering AC/DC 12 to 230 V for integrating active sensors, switches, and control signals into a KNX installation. It is designed for mounting in an ... -
RL 513D23 KNX Binary Output 3 x 6 A AC 230 V Modular Relay Scene Control and Load Monitoring 5WG1513-4DB23
RL 513D23 KNX Binary Output 3 x 6 A AC 230 V Modular Relay This modular KNX binary output combines three independent relay channels, each rated at 6 A for AC 230 V resistive loads, in a compact enclosure for automation module boxes. Each output can operate in normal or time-switch mode, with ...
