Français
Deutsch
Italiano
Русский
Español
Português
Nederlandse
Ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
Indonesia
Tiếng Việt
ไทย
বাংলা
فارسی
Polski
UP 562S32 KNX DIN Flush-Mount Lighting & Blind Actuator 2xAC 230V 16A 3 Inputs 5WG1562-2SB32
The UP 562S32 KNX flush-mount actuator integrates two independent switching channels into a compact 60 mm appliance box device. Each channel provides one relay contact rated for AC 230 V, with a combined 16 A rating across both outputs. Three binary inputs accept potential-free contacts for local switching status detection and direct output control, with an input poll voltage of approximately 5 V and a maximum cable length of 10 m. Bus-powered electronics and an integrated bus coupling unit enable direct connection to the KNX bus. The device supports KNX Data Secure and is firmware-updateable.
Switching outputs can be configured as NO or NC contacts, with status feedback, cyclical monitoring, adjustable delays, staircase function, scene control, logic operations, operating hours counting, and forced or central switching. In solar protection mode, the unit controls venetian blinds, shutters, awnings, louvers, and roof windows with slat adjustment and alarm response.
| Communication | KNX bus |
| Relay Outputs | 2x AC 230 V |
| Rated Frequency | 50/60 Hz |
| Total Rated Current | 16 A |
| Binary Inputs | 3 (for potential-free contacts) |
| Conductor Cross-section | 0.5 to 4 mm without sleeve or 0.5 to 2.5 mm with sleeve |
| Mounting | Appliance boxes per DIN 49073 or in M 592/01 case |
| Dimensions | 48 x 50 x 28 mm |
| Warranty | 24 months |
- Hotel room lighting and shading
- Residential KNX automation
- Office lighting and sun protection zones
- Concealed wall-box installations
Ms. Nora
Sales Manager
- Email: nora@knxcomponents.com
- Tel: +8613427540176
- WhatsApp: 8613427540176
-
WeChat:
+8613427540176
-
AP 257/51 KNX Outdoor Weather Station Wind Brightness Temperature 3 Facades 5WG1257-3AB51
AP 257/51 KNX Outdoor Weather Station Wind Brightness Temperature 3 Facades 5WG1257-3AB51 The AP 257/51 KNX weather station is a mast or wall-mounted outdoor sensor unit for weather-responsive building automation. It measures wind speed from 2 to 30 m/s and provides three independent brightness ... -
N 502/02 KNX Combi Switching Actuator 8xAC 230V 16A 8 Binary Inputs DIN Rail 5WG1502-1AB02
N 502/02 KNX Combi Switching Actuator 8xAC 230V 16A 8 Binary Inputs DIN Rail 5WG1502-1AB02 Product Overview The KNX combi switching actuator integrates eight relay outputs and eight potential-free binary inputs in a single modular DIN rail device. Each output is rated for AC 230 V at 16 A, making it ... -
N 263D51 KNX Binary Input Module 8xAC/DC 10-230V, DIN Rail LED Status Display 5WG1263-1DB51
N 263D51 KNX Binary Input Module 8xAC/DC 10-230V, DIN Rail LED Status Display 5WG1263-1DB51 The KNX binary input module delivers eight voltage inputs across AC/DC 10 to 230 V, allowing direct connection of active sensors, relay contacts, and signal sources. Each input is equipped with a direct ...
