MTN647395 Schneider KNX Switch Actuator REG-K 2-Channel 16A Current Detection Manual Grey DIN Module
The MTN647395 belongs to the SpaceLogic KNX switching-actuator portfolio engineered by Schneider Electric for reliable, high-density load commutation inside standard TH35 DIN distribution boards. This maintenance-friendly power rail element bridges KNX telegrams from the control layer into tangible 230 V AC switching actions for lighting, socket, and small-appliance circuits.
Factory-configured to accept commissioning data through the ETS toolchain, the unit integrates seamlessly with Schneider push-button interfaces, presence detectors, and scene controllers. Its compact mechanical profile, bistable-relay core, and clearly labeled front fascia reduce wiring effort and speed up panel assembly.
Built around flame-retardant engineering plastics and lead-free solder joints, the device complies with contemporary eco-design directives while sustaining continuous duty in commercial buildings, hotel guest wings, and residential smart-home distributions. Every output is protected against miswiring errors and supports group-address sharing for simultaneous multi-circuit control.
| Model Reference | MTN647395 |
| Product Classification | KNX switching actuator, 2 independent outputs |
| Bus Protocol | KNX TP1 (S-Mode), KNX Association certified |
| Output Stages | 2 x 230 V AC / 16 A with current detection |
| Rated Bus Voltage | DC 30 V SELV (bus-powered, polarity protected) |
| Bus Current Consumption | 10-16 mA typical at 24 V DC |
| Operating Voltage Range | 230 V AC, 50/60 Hz (switching side) |
| Contact Technology | Bistable relay contacts, potential-free commutation |
| Inrush Handling | Designed for capacitive and LED driver inrush currents |
| Manual Facility | Manual mode with toggle override |
| Monitoring Feature | Per-channel load current sensing and monitoring |
| Mounting | DIN rail TH35 per EN 60715 |
| Ambient Range | -5°C to +45°C operating, storage to +55°C |
| Protection Degree | IP20 (installed in closed panel environment) |
| Wire Termination | Screw terminals accepting 0.5-4.0 mm² conductors |
| Compliance | CE, RoHS, REACH, KNX certified, Schneider Green Premium eco-profile |
The two-channel current-detection version fits distribution boards where lighting or equipment status must be verified remotely. Energy managers use its load feedback to confirm lamps actually energize and to log burn-time for maintenance planning, while the manual toggles provide on-site fallback in corridors and plant rooms.
Schneider KNX switch actuator 2-channel
,KNX DIN module with current detection
,16A switch actuator manual grey
-
MTN647593 Schneider KNX Switch Actuator REG-K 4-Channel 16A Manual Mode Light Grey DIN Rail 4 Module
MTN647593 Schneider KNX Switch Actuator REG-K 4-Channel 16A Manual Mode Light Grey DIN Rail 4 Module Advanced KNX switching actuator for reliable load commutation in commercial and residential building automation systems. Product Overview The MTN647593 belongs to the SpaceLogic KNX switching... -
MTN6700-0108 Schneider KNX 8-Channel Hybrid Switch Shutter Actuator White DIN Rail Multi-Function Module
MTN6700-0108 Schneider KNX 8-Channel Hybrid Switch Shutter Actuator White DIN Rail Multi-Function Module Product Overview The MTN6700-0108 belongs to the SpaceLogic KNX switching-actuator portfolio engineered by Schneider Electric for reliable, high-density load commutation inside standard TH35 DIN ... -
MT-E2-KP08 E2-Series 8-Key ODM Smart Panel KNX Lighting Curtain Dimming Scenes No Aux Power Dual LED
MT-E2-KP08 E2-Series 8-Key ODM Smart Panel Product Overview The MT-E2-KP08 is an 8-key smart control panel from our E2-Series featuring full-metal matte keys in an elegant, minimalist design. This KNX-compatible panel provides real-time control of lighting, curtains, dimming, and scenes without ...