MTN6720-0008 Schneider SpaceLogic KNX 1-10V Dimmer Eight Circuit Hand Mode 230V White DIN Rail Unit
The MTN6720-0008 is the eight channel member of the SpaceLogic KNX 1 to 10 volt dimming family from Schneider Electric, supplied in white for DIN rail mounting. It performs the same function as the four channel unit but offers higher density, making it ideal for applications requiring multiple control zones.
This device provides eight analogue control outputs in a single unit, occupying less cabinet space and requiring fewer network addresses than multiple four-channel units. The output carries a control signal rather than lamp current, making the actuator electrically compact relative to the lighting it commands. Manual operation is conveniently provided at the actuator for commissioning and maintenance.
| Product Type | Dimming actuator for 1 to 10 V control gear |
|---|---|
| Order Number | MTN6720-0008 |
| System | SpaceLogic KNX |
| Channels | Eight independently controlled dimming outputs |
| Control Interface | 1 to 10 V analogue output to electronic ballasts and LED drivers |
| Supply Voltage | 230 V AC |
| Manual Operation | Hand operation at the device for commissioning and maintenance |
| Load Limits | Set by the number of drivers per output and control cable length |
| Enclosure | White, DIN rail mounted lighting cabinet |
| Software Functions | Dimming curves and rates, minimum/maximum values, memory, staircase timer, scenes, logic, status feedback |
| Lifecycle Status | Current SpaceLogic KNX item |
| Compliance | CE marking; RoHS and REACH declarations held by Schneider Electric |
The eight-channel design offers significant advantages in cabinet space optimization and commissioning efficiency, reducing the number of network addresses to program and parameters to maintain. However, this concentration of outputs requires careful consideration of operational risk management for mission-critical lighting applications.
- Calculate the number of drivers per output according to manufacturer specifications
- Maintain control cable length within recommended guidelines
- Set minimum and maximum dimming values per channel based on installed fittings
- Finalize zoning requirements before commissioning to avoid disruptive changes
This dimmer is ideally suited for various commercial and industrial applications requiring multiple lighting control zones:
- Large Open Plan Offices: Daylight control across multiple zones with varying facade orientations
- Transportation Hubs: Airports, stations, and shopping centers with long lighting runs divided into energy management zones
- Industrial Facilities: Sports halls and industrial buildings with high bay lighting requiring grid-based daylight response
- Educational Institutions: Schools and universities serving entire buildings with separately zoned teaching spaces, corridors, and social areas
- Distributed Control Systems: Applications where control gear and actuators are separated by distance, making phase dimmers impractical
Schneider KNX 1-10V dimmer
,eight-circuit dimming actuator
,DIN rail dimmer 230V
-
UD/S 2.300.2 ABB KNX Universal Dimmer 2-Channel 300 VA DIN Rail Actuator for Halogen and Transformer Loads
UD/S 2.300.2 ABB KNX Universal Dimmer 2-Channel 300 VA DIN Rail Actuator Product Overview The ABB i-bus KNX UD/S 2.300.2 is designed for classic lighting hardware applications. This DIN rail-mounted actuator features two dimmer outputs that receive instructions via the KNX bus system, enabling ... -
5WG1525-2SB32 UP 525S32 KNX Universal Dimmer 300W LED 200VA 3-Fold Binary Input Secure
5WG1525-2SB32 UP 525S32 KNX Universal Dimmer 300W LED 200VA 3-Fold Binary Input Secure The UP 525S32 represents the latest S generation of flush-mount dimmers, combining universal dimming output and three-fold binary input functionality in a single wall box module. Product Overview This advanced ... -
5WG1536-1DB31 N 536D31 KNX 4-Channel Switch/Dim Actuator 4x230V 10AX 1-10V DIN Rail
5WG1536-1DB31 N 536D31 KNX 4-Channel Switch/Dim Actuator 4x230V 10AX 1-10V DIN Rail Product Overview The N 536D31 (5WG1536-1DB31) provides KNX installations with direct control of luminaires dimmed through 1-10 V control inputs. Each channel features two integrated terminals: a 230 V switching ...