Français
Deutsch
Italiano
Русский
Español
Português
Nederlandse
Ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
Indonesia
Tiếng Việt
ไทย
বাংলা
فارسی
Polski
N 536D31 5WG1536-1DB31 KNX Dimming Actuator 4 Outputs 230V 10AX with 1-10V Control 6TE Rail
Product Summary
N 536D31 5WG1536-1DB31 KNX Dimming Actuator 4 Outputs 230V 10AX with 1-10V Control 6TE Rail Product Overview The N 536D31 addresses specific lighting control requirements where luminaires must be physically switched off from the mains while being dimmed through an analogue control wire. Each of its ...
Basic Properties
Certification:
CE
Model Number:
N 536D31
Trading Properties
Minimum Order Quantity:
5
Payment Terms:
T/T
Product Description
N 536D31 5WG1536-1DB31 KNX Dimming Actuator 4 Outputs 230V 10AX with 1-10V Control 6TE Rail
Product Overview
The N 536D31 addresses specific lighting control requirements where luminaires must be physically switched off from the mains while being dimmed through an analogue control wire. Each of its four channels provides two terminals working as a pair: a 230V contact for the lamp circuit and a passive DC 1-10V output for the ballast or LED driver.
Technical Specifications
Protocol:
KNX, device electronics fed from bus at DC 24V (DC 21-30V)
Bus Current:
20 mA, internal consumption 0.24W
Channels:
4 potential-free bistable relay contacts paired with 4 passive DC 1-10V outputs (Channels A-D)
Relay Rating:
16A resistive loads, 10AX lamp loads, 3680W per output
Control Output:
Passive 1-10V, maximum 106mA at standard mounting position and +25°C
Load Capacity per Channel
| Load Type | Capacity |
|---|---|
| Incandescent or 230V Halogen | 2500 W |
| Low-voltage Halogen (conventional transformers) | 500 W |
| Uncompensated T5/T8 Fluorescent Lamps | 2300 VA (1300 W parallel compensated) |
| DUO Circuits | 2300 VA |
| Compact Fluorescent Lamps (uncompensated) | 1600 VA |
Physical & Environmental
- Rail device in N dimension for 35mm rail to IEC 60715
- Six module widths (108mm), 279g weight
- Plastic housing with 6 MJ fire load
- Operating temperature: -5 to +45°C
- Storage temperature: -20 to +70°C
- Humidity: 5 to 95% non-condensing
- IP20, pollution degree 2, overvoltage category III
- Failure rate: 561 fit at 40°C
- 1,000,000 mechanical and 100,000 electrical switching cycles
Engineering Features
- ETS 4.2 or above compatible
- Two timers plus night mode
- Up to seven override blocks
- Configurable dimming curves and fade times
- 8-bit scene control
- Switching-cycle and operating-hour counters with threshold warning
- Membrane keypad for tool-free direct operation and status display
Application Scenarios
Ideal for floor distribution boards supplying dimmable fluorescent or LED lighting in offices, hotels, schools, and industrial halls where each zone requires mains isolation for servicing plus shared 1-10V dimming control. Suitable for mixed boards with both dimmed and switched circuits, with building-site operation and override blocks facilitating phased handover.
Product Details
Highlight:
KNX dimming actuator 4 outputs
,230V dimming actuator 1-10V control
,6TE rail dimming actuator 10AX
Protection:
Electrical Isolation Between Segments
Loadtype:
Resistive And Inductive
Power Consumption:
Standby <1W, Operating Current 0.5-2mA
Front Material:
Tempered Glass
Operating Mode:
KNX Bus System
Ms. Nora
Sales Manager
- Email: nora@knxcomponents.com
- Tel: +8613427540176
- WhatsApp: 8613427540176
-
WeChat:
+8613427540176
Related Products
-
NP16162_01MS Schneider Unica KNX 4 Key Push Button Metallic Silver Backlit Scene Control Panel Unit
Product Overview The NP16162_01MS is a four-key Unica KNX push button in a metallic silver finish. This variant of the four-key panel is chosen where the device is visible against a metal or light surface, and the design intent is that the control should read as part of the architecture. Four keys ... -
NP16161_01MS Schneider Unica KNX 2 Key Push Button Metallic Silver Backlit Scene Control Panel Unit
Product Overview The NP16161_01MS is a two-key Unica KNX push button finished in metallic silver — a surface that reads as a machined metal face rather than painted plastic, making it the preferred choice where the wall device is part of the visible design. The functional description is straightforw... -
5WG1528-1DB01 N 528D01 KNX Universal Dimming Actuator 2x300VA 230V LED No Min Load
5WG1528-1DB01 N 528D01 KNX Universal Dimming Actuator 2x300VA 230V LED No Min Load Product Overview The N 528D01 (5WG1528-1DB01) is a two-output universal dimming actuator in DIN-rail format. Universal means that the device reads the connected load and automatically decides whether leading-edge or ...
