MTN62 Series Basic Switch Control Modules - Complete Product Guide

The MTN62 series represents the foundation of Schneider Electric's MTN lighting control portfolio. Designed for residential, commercial, and hospitality applications, these modules provide reliable on/off switching functionality with seamless integration capabilities.

Electrical Parameters:

• Rated voltage: 230V AC ±10%
• Switching current: 10A resistive load
• Inrush current capability: 160A (20ms)
• Power consumption: <0.5W standby
• Contact material: Silver-nickel alloy

Physical Specifications:

• Dimensions: 86mm * 86mm * 32mm
• Mounting: Standard 60mm wall box
• Protection class: IP20
• Operating temperature: -5°C to +45°C
• Weight: 85g

Communication Interface:

• Protocol: KNX TP1
• Bus voltage: 21-30V DC
• Current consumption: 8mA (typical)
• Connection: Screw terminals, 0.5-2.5mm²

Additional Features over MTN620619:

• Status feedback: Potential-free contact
• Feedback voltage: Max 30V AC/DC
• Feedback current: Max 100mA
• Scene integration: Up to 8 scenes
• LED status indication: RGB multi-color

Multi-Channel Capability:

• Channels: 4 independent switching outputs
• Per channel rating: 10A/250V AC
• Total load management: Intelligent load balancing
• Individual channel control: Yes
• Group control: Programmable

Advanced Functions:

• Staircase lighting timer: 1s to 18 hours
• Cyclic timer: Programmable intervals
• Logic functions: AND, OR, XOR gates
• Priority control: Override functions

Residential Applications: The MTN620619 and MTN620519 are ideal for standard room lighting control. The MTN619225 series adds climate control integration, making it perfect for smart home implementations.

Commercial Buildings: MTN617144's multi-channel capability reduces installation costs by controlling four lighting zones from a single device. The MTN617249's current detection enables energy monitoring and predictive maintenance.

Hospitality Sector: MTN619514's premium glass surface design complements modern interiors while providing comprehensive room control including lighting, temperature, and blinds.

Wiring Requirements:

• Mains connection: 3-wire (L, N, load)
• Bus connection: 2-wire twisted pair
• Cross-section: 0.5-2.5mm² solid or stranded
• Stripping length: 8-10mm

Mounting Instructions:

1. Install in standard 60mm flush-mounting box
2. Connect mains voltage (observe polarity)
3. Connect KNX bus (polarity insensitive)
4. Configure via ETS software
5. Test all functions before closing

The MTN62 series is fully compatible with:

• KNX standard devices
• Schneider Electric SpaceLogic KNX system
• Third-party KNX certified products
• Previous generation MTN devices (backward compatible)

• CE marking according to Low Voltage Directive
• KNX certified (MTN620619, MTN620519)
• EN 60669-2-1 compliant
• RoHS compliant
• REACH compliant