MTN63 Series Smart Sensor Modules - Intelligent Detection Solutions

The MTN63 series encompasses advanced sensor technology for intelligent building automation. From basic motion detection to sophisticated multi-sensor fusion, these modules enable energy-efficient, responsive lighting and climate control.

The MTN630419 uses passive infrared technology to detect human presence through body heat detection:

• Sensor element: Dual-element pyroelectric
• Detection angle: 360° (ceiling mount)
• Detection range: 8m diameter at 2.5m mounting height
• Detection zones: 94 individual zones
• Sensitivity: Adjustable in 4 levels
• Response time: <0.5 seconds

• Operating voltage: 230V AC ±10%
• Standby consumption: <0.3W
• Switching capacity: 10A/250V AC (integral relay)
• Output: Potential-free contact
• Contact life: >100,000 operations

• Housing: ABS plastic, UV stabilized
• Lens: Fresnel lens array, IR transparent
• Dimensions: Ø85mm * 45mm (flush)
• Mounting: 60mm ceiling box or surface mount
• Protection: IP20 (IP44 version available)

The MTN630514 adds an integrated light sensor for intelligent daylight-responsive control:

• Sensor type: Silicon photodiode
• Spectral response: 400-700nm (human vision matched)
• Measurement range: 10 to 10,000 lux
• Accuracy: ±10% (at 25°C)
• Temperature drift: <0.5%/°C

• Daylight switching: Lights off when sufficient daylight
• Constant light control: Maintains target illuminance
• Dimming integration: 0-10V or DALI output (with external module)
• Hysteresis: Prevents rapid cycling (adjustable 10-50%)

The MTN630614 combines presence detection, light measurement, and temperature sensing in one device:

• Type: NTC thermistor
• Range: 0°C to +50°C
• Accuracy: ±0.5°C (at 25°C)
• Response time: 5 minutes (in air)
• Application: Climate control, frost protection

• All sensor values transmitted via KNX
• Cyclic transmission: Configurable 1-60 minutes
• Threshold transmission: On significant change
• Data point types: DPT 1 (switch), DPT 5 (percent), DPT 9 (temperature)

MTN630614 provides:
├── Presence → Lighting on/off
├── Light level → Dimming adjustment
└── Temperature → HVAC setpoint adjustment

All via single KNX device address

The MTN630719 uses 5.8GHz microwave Doppler radar for advanced detection capabilities:

• Through-glass detection: Works behind windows, glass partitions
• Motion sensitivity: Detects smaller movements (typing, reading)
• Temperature independent: Consistent performance in all conditions
• No blind spots: 360° continuous coverage

• Frequency: 5.8GHz ±75MHz
• Transmit power: <10mW (compliant with ETSI EN 300 440)
• Detection range: 12m diameter (adjustable)
• Sensitivity: 0.3-3m/s motion speed
• Mounting height: 2.5-4m recommended

• Glass-walled offices
• Showrooms with display windows
• Cold storage facilities
• High-ceiling industrial spaces

The MTN6330819 represents the most comprehensive environmental sensing solution:

1. PIR presence: Large-area motion detection
2. Acoustic: Sound level monitoring (40-90dB)
3. Light: 360° ambient light measurement
4. Temperature: Air temperature sensing
5. Humidity: Relative humidity measurement (0-95% RH)

• Smart building management systems
• Conference room automation
• Healthcare facility monitoring
• Educational institution energy management

These models offer native KNX integration without additional interfaces:

• KNX bus powered: No mains connection required
• Current consumption: 12mA (typical)
• Detection: PIR, 360°, 8m range
• Functions: Presence, brightness, constant light
• Flush mounting: 60mm ceiling box

• Extended range: 12m diameter
• Higher mounting: Up to 4m ceiling height
• Professional lens: 136 detection zones
• Masking: Adjustable detection area
• KNX interface: Full data point configuration

• Keep away from HVAC vents (air movement)
• Avoid direct sunlight on sensor lens
• Minimum 1m from fluorescent ballasts
• Do not mount near microwave ovens

• CE marking (RED directive for MTN630719)
• KNX certified (MTN633519, MTN633719)
• EN 60669-2-1
• EN 50130-4 (immunity for alarm systems)
• RoHS, REACH compliant