Français
Deutsch
Italiano
Русский
Español
Português
Nederlandse
Ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
Indonesia
Tiếng Việt
ไทย
বাংলা
فارسی
Polski
SpaceLogic KNX 4 Channel Hybrid Switch Actuator Manual Control MTN6700-0104
Product Summary
Schneider Electric's 4-channel hybrid KNX actuator offers manual override, IP20 protection, and supports diverse loads (LEDs, motors up to 1500VA). Ideal for smart buildings, industrial automation, and energy management with KNX integration.
Basic Properties
Place of Origin:
EU
Brand Name:
Schneide
Certification:
RoHS/Reach
Model Number:
MTN6700-0104
Trading Properties
Minimum Order Quantity:
5
Payment Terms:
T/T,Western Union
Product Description
SpaceLogic KNX 4-Channel Hybrid Switch Actuator MTN6700-0104
Professional Schneide Electric actuator with manual control in white finish, designed for advanced building automation systems.
KNX Software Functions
| Core Functions | Live signal, enabling safety priority function, central control of switching/curtains function, sending delay after bus voltage recovery |
|---|
Actuator Functions
Switching Actuator Functions
| Basic Functions | Preset, Logic, Threshold, Safety, Forced, Locking, Central, Time function for each channel |
|---|---|
| Scene Functions | Including delay, flashing and staircase timer |
| Bus Voltage Fault Recovery | Relay state after bus voltage failure/recovery; object value of the Switch object after voltage recovery |
| Status Feedback | Status feedback/ETS download object per channel |
Heating Actuator Functions
| Control Protocol | PWM cycle time (continuous), 1 bit/1 byte control telegram |
|---|---|
| Additional Functions | Valve protection, Safety, Locking, Forced, Cyclic continuous operation, Operation as NC/NO |
| Bus Voltage Fault Recovery | Valve position after bus voltage failure or recovery |
| Status Feedback | KNX Response value when contact is opened or closed |
Power Supply & Electrical Parameters
| Power Supply | KNX Bus |
|---|---|
| Rated Current | 9 mA, maximum 20 mA/24 V |
| KNX Power Consumption | ≤ 840 mW |
| Nominal Voltage | AC 250 V; 50/60 Hz |
| Nominal Power per Contact | AC1 10 A operation (cosφ = 0.8) acc. with IEC 60947-4-1 AC3 6 A operation (cosφ = 0.45) acc. with IEC 60947-4-1 |
| Relay Parameters | Switching frequency at rated load: Maximum 60 operation/min Mechanical service life: ≥ 1×10⁹ Inrush current: 320 A/2 ms |
Load Compatibility
| Load Type | Maximum Load Power |
|---|---|
| Incandescent lamp | 2500 W |
| Fluorescent lamp | 250 W |
| Electronic transformer for extra low voltage lamps (e.g., halogen lamps) | 1100 W |
| Iron core transformer for extra low voltage lamps (e.g., halogen lamps) | 900 W |
| LED lamp | 300 W (cosφ ≥ 0.6); 150 W (0.5 ≤ cosφ < 0.6) |
| Capacitive loads | 100 µF, 10 A, 140 µF |
| Motors | 1500 VA (cosφ = 0.6) |
Physical & Environmental Parameters
| Protection Class | IP20 |
|---|---|
| Insulation Category | Overvoltage category III, pollution degree 2 |
| Operating Temperature | -5...+45℃ |
| Storage Temperature | -25...+55℃ |
| Transport Temperature | -25...+70℃ |
| Maximum Humidity | 93%, no condensation |
| Installation Height | As high as 2000 m above sea level |
| Dimensions (W×H×D) | 72×90×64 mm |
Connection & Contents
| KNX Bus Connection | Bus connection terminal |
|---|---|
| Mains Connection Port | Screw terminal blocks, 2×6-gang |
| Contents | With bus connecting terminal and cable cover |
Application Scenarios
- Smart Buildings: Connects mechanical wall switches to control lighting, blinds, or HVAC (e.g., a light switch triggering KNX switch actuators).
- Access Control & Security: Links door contacts, emergency buttons, or motion sensors to trigger alarms or lighting (e.g., fire alarm contacts activating emergency lighting).
- Industrial Automation: Integrates with equipment limit switches or sensors to monitor machine status (e.g., elevator position signals linking to lobby lighting).
- Hotel & Office Buildings: Connects occupancy sensors or card readers to automate energy-saving modes (e.g., guest card removal cutting off room power).
Product Details
Highlight:
4 Channel Hybrid Switch Actuator
,Manual Control KNX Switch Actuator
,MTN6700-0104 Hybrid Switch Actuator
Motors:
1500 VA, Cosφ ≥ 0.6
Operatingspeed:
0.1 Seconds Per Operation
Weight:
200 Grams
Operatingcurrent:
0.5A
Controlmethod:
Electrical And Manual Override
Operatingtemperaturerange:
-20°C To 70°C
Protectionrating:
IP20
Mountingtype:
Panel Mount
Power Supply:
KNX Bus
Dimensions:
72mm X 90mm X 64mm
Operatingvoltage:
12V DC
Productname:
Hybrid Switch Actuators
Material:
Plastic
Actuatortype:
Hybrid
Color:
White
Ms. Nora
Sales Manager
- Email: nora@knxcomponents.com
- Tel: +8613427540176
- WhatsApp: 8613427540176
-
WeChat:
idainchina518
Related Products
-
N 141/31 KNX DALI-2 Gateway Twin 2 Outputs 64 ECG Each RGBW Tunable White DIN 5WG1141-1AB31
N 141/31 KNX DALI-2 Gateway Twin 2 Outputs 64 ECG Each RGBW Tunable White DIN 5WG1141-1AB31 This KNX/DALI-2 gateway twin offers two independent DALI outputs, each certified to DALI-2 per IEC 62386-101 and 103, and communicates with up to 64 DALI electronic control gears per output. Output Capabiliti... -
JB 260C23 KNX Built-In Binary Input 4xAC/DC 12-230V UL/NEMA Junction Box Mount 5WG1260-4CB23
JB 260C23 KNX Built-In Binary Input 4xAC/DC 12-230V UL/NEMA Junction Box Mount 5WG1260-4CB23 The KNX binary input device is a built-in module designed for installation in or on UL/NEMA junction boxes using a 1/2 inch threaded connection. It provides four AC/DC 12 to 230 V inputs for connecting ... -
N 262D51 KNX Binary Input Module 8x Dry Contacts DIN Rail LED Status Display 5WG1262-1DB51
N 262D51 KNX Binary Input Module 8x Dry Contacts DIN Rail LED Status Display 5WG1262-1DB51 The KNX binary input module provides eight dry contact inputs for reading potential-free contacts in building automation installations. Each input features a direct operation function with LED status ...
