5WG1141-1AB31 N 141/31 KNX DALI Gateway Twin 2 Channel 64 ECG 32 Groups 128 Lights

The N 141/31 (5WG1141-1AB31) is a KNX/DALI Gateway Twin that transforms a KNX installation into a comprehensive DALI lighting control system without requiring additional interface hardware. Two independent DALI outputs each drive their own lighting line, enabling control of up to 128 DALI actuators from a single rail-mounted gateway. These can be organized into 32 groups and 32 scenes. The integrated power supply unit powers both the gateway electronics and generates the DALI bus voltage, eliminating the need for separate DALI power supplies on either line.

• One- or two-level timer functionality
• Integrated scene control for up to 32 scenes
• 16 integrated two-level controllers for constant light
• Transformation of dimming commands into setpoint adjustments for ballasts with integrated light-level control
• Stand-alone mode maintains DALI group operation during KNX communication failures

• LC display for operating mode and error messages
• Pushbutton to switch between bus and direct mode
• Pushbuttons for switching all connected DALI ballasts on/off
• One status LED per DALI output

• Integrated bus coupling unit drawing only half a standard bus load
• DIN rail mounting to EN 60715-TH35-7.5
• Width: 4 MW (72 mm)
• Weight: Approximately 0.47 kg

• ETS plug-in with table-based parameter pages
• Configurable columns with sorting and filtering
• Configuration backup inside ETS
• Import function for converting configuration data from other KNX/DALI gateways
• Requires ETS 5 or above with firmware V15

This gateway is ideal for projects requiring large numbers of individually addressable luminaires with group-based control:

• Office floors with zoned lighting control
• Hotel lighting systems with scene management
• Shopping centers requiring flexible lighting arrangements
• Airport terminals with complex lighting requirements
• Planning offices and multipurpose halls utilizing the 32 groups to separate work zones

The module's autonomous operation capability makes it suitable for areas where lighting must remain functional during KNX network maintenance.