N 141/32 5WG1141-1AB32 KNX DALI Gateway Twin 2 Lines 128 Channels DALI-2 HCL Colour

Product Summary
N 141/32 5WG1141-1AB32 KNX DALI Gateway Twin 2 Lines 128 Channels DALI-2 HCL Colour N 141/32 is the two-line model of the current DALI-2 gateway generation and, like its single-line sibling, it is certified as a multi-master application controller. Two DALI lines are managed from one rail-mounted ...
Basic Properties
Certification: CE
Model Number: N 141/32
Trading Properties
Minimum Order Quantity: 5
Payment Terms: T/T
Product Description
N 141/32 5WG1141-1AB32 KNX DALI Gateway Twin 2 Lines 128 Channels DALI-2 HCL Colour
N 141/32 is the two-line model of the current DALI-2 gateway generation and, like its single-line sibling, it is certified as a multi-master application controller. Two DALI lines are managed from one rail-mounted device, each engineered on its own, which allows a building to separate lighting domains without buying two gateways. Colour control, DALI-2 sensors and an integrated IP interface are part of the package.
Technical Specifications
System and Capacity: KNX TP1-256 on the automation side and two independent DALI outputs to IEC 62386 on the lighting side. Each line addresses up to 64 full DALI channels, controlled individually or combined automatically into up to 32 groups, with sixteen scenes available per line.
Inputs on the Lighting Side: Twelve DALI-2 brightness sensors to Part 304, twelve DALI-2 presence sensors to Part 303 and twelve DALI-2 pushbutton couplers to Part 301 per DALI output, all running as instances and energised from the DALI line itself.
Colour and Regulation: Colour temperature control for Tunable White luminaires plus RGB, RGBW, HSV and HSVW for DALI Device Type 8 gear to IEC 62386-209, so human-centric lighting schemes are supported directly; two-point and closed-loop constant light control, configurable dimming curves, time and effect control, and up to 32 standby areas per concept to curb idle consumption.
Supply and Wiring: One internal AC 230 V mains unit powers the gateway and produces the DALI bus voltage for both lines, so no separate DALI supply is installed; DALI current is capped at 190 mA per channel, with 2 mA typical per ballast and 6 mA per extra sensor.
Cable Size Maximum Length
2.5 mm² 300 m
1.5 mm² 300 m
1.0 mm² 224 m
0.75 mm² 168 m
0.5 mm² 112 m
Segment Role and Commissioning: The device is intended to be the only multi-master application controller in each of its DALI segments; the IP interface shortens download times during commissioning, and hardware, application program and Device Control App form the scope of delivery. The housing is a rail unit for installation inside a distribution board.
Application Scenarios
Buildings with two large lighting domains that should not be mixed benefit most:
  • A hotel separating guest-room floors from public areas
  • An office separating workspaces from circulation zones
  • A hospital with ward and corridor lighting
  • A retail site where accent Tunable White lighting runs beside general illumination
Multi-storey projects gain from the faster commissioning path, and the standby areas support energy targets in buildings with long unoccupied periods.
Key Benefits: Two independent DALI lines in one device • Certified multi-master application controller • Integrated IP interface for faster commissioning • Human-centric lighting support • Energy-saving standby areas
Product Details
Highlight:

KNX DALI Gateway Twin 2 Lines

,

DALI-2 HCL Colour dimming actuator

,

128 channels KNX dimming actuator

Communicationprotocol: KNX
Statusindicator: LED For Operation Status
System: KNX Building Automation Bus
Installation: 35mm DIN Rail Mounting,
Button Type: Momentary Push Button
Material: Stainless Steel
Dimmingtype: Leading Edge / Trailing Edge

Ms. Nora

Sales Manager

Related Products
Send an Inquiry