Français
Deutsch
Italiano
Русский
Español
Português
Nederlandse
Ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
Indonesia
Tiếng Việt
ไทย
বাংলা
فارسی
Polski
N 141/31 5WG1141-1AB31 KNX DALI Gateway Twin 2 Lines 128 Ballasts 32 Groups Stand Alone
The N141/31 is the basic twin model in the KNX/DALI family, serving as an entry point for projects requiring two DALI lines at moderate cost. This gateway efficiently brings large numbers of digital ballasts under KNX control, organizes them into groups, drives them through scenes, and maintains lighting operation when the automation network is unavailable.
| Protocol & Addressing | KNX TP1 device with two DALI interfaces to IEC 60929 Each interface supports up to 64 DALI ballasts Maximum 128 ballasts across both lines Up to 32 DALI groups Status and lamp-failure feedback per group and device |
|---|---|
| Power Supply | 110-240 V AC, 50/60 Hz or 120-240 V DC DALI bus voltage: maximum 19 V, short-circuit proof Powers connected DALI sensors Additional DALI supply not required or permitted |
| Local Interface | LC display for operating mode and error text One key toggles between bus and direct mode Two keys for switching all ballasts on/off Individual status LED for each DALI output |
| Functions & Operation | Broadcast operation for entire lines Group control with switching and dimming 16 two-level controllers for brightness-dependent switching Timer functions (one- or two-level) 32 scene control capability Stand-alone operation during KNX communication failure |
| Engineering & Mechanical | ETS plug-in with table-oriented parameter view Customizable columns with sorting and filtering Configuration stored in ETS project Import function for data from other KNX/DALI gateways Requires ETS 5 or above with firmware V15 4 module widths (72 mm) on DIN rail EN 60715-TH35-7.5 Weight: approximately 0.47 kg |
Compared to plus models, this device omits:
- DALI sensor and input-device support
- Emergency lighting test logging
- Constant-light and two-point control
- Timer/effect blocks and pre-loaded applications
Broadcast, group, scene, and stand-alone operation remain fully available.
DALI-2 certificate valid where DALI-2 logo appears on device label.
Ideal for office buildings, hotels, shopping centers, airports, and campus buildings where luminaires require individual addressing but primarily group control. The 32 groups effectively separate work zones in planning offices and multipurpose halls. The autonomous operation capability makes it suitable for areas where lighting must remain operational during KNX network maintenance.
KNX DALI Gateway Twin 2 Lines
,DALI Gateway 128 Ballasts
,KNX dimming actuator 32 groups
Ms. Nora
Sales Manager
- Email: nora@knxcomponents.com
- Tel: +8613427540176
- WhatsApp: 8613427540176
-
WeChat:
+8613427540176
-
NP16212_01MS Schneider Unica Range KNX Wall Station Five Keys Metallic Silver with Room Thermostat Screen
Product Overview The NP16212_01MS is a combined push button and room thermostat in a metallic silver finish, designed to consolidate the two controls a room occupant most frequently reaches for — lighting and temperature — onto a single 86 mm faceplate. The unit features five operating buttons with ... -
Thermoplastic Schneide Cuadro H KNX 4 Key Push Button Panel C2E616201_MB C1 IP20
Schneider Electric C2E616201: 4-key KNX push-button in durable thermoplastic. IP20 rated, 21-30V DC operation, 86x86mm flush mount. Ideal for modern offices and commercial smart control systems. -
AA/A 2.1.2 ABB i-bus KNX 2-Channel Analogue Output Module Surface Mount 0-10V Bus Powered Valve Actuator
AA/A 2.1.2 ABB i-bus KNX 2-Channel Analogue Output Module Surface Mount 0-10V Bus Powered Valve Actuator Product Overview The two-channel member of ABB's analogue output family is the i-bus KNX AA/A 2.1.2, delivered as a complete surface-mounted unit. It converts bus telegrams into 0...10 V DC ...
