dimming actuator knx

N 554D31 KNX Universal Dimmer 4x300VA 1x1000VA AC 230V Bus Powered 4 Channel DIN Rail 5WG1554-1DB31 The KNX universal dimmer is a four-channel DIN rail device for switching and dimming resistive, inductive, and capacitive loads. Each output is rated up to 300 VA at AC 230 V, and adjacent outputs can be bundled to drive loads up to 1000 VA without minimum load per output. The dimmer automatically adjusts to leading edge or trailing edge control based on load type, while

N 262E11 KNX Binary Input Device 16x Potential-Free Contacts DIN Rail Mount 5WG1262-1EB11 The KNX binary input device delivers sixteen potential-free contact inputs for integrating pushbuttons, switches, and relay contacts into a KNX installation. Key Features & Functions Each input is equipped with an LED for status display and supports cable runs up to 100 m using unshielded connecting cable Input functions include configurable telegram rate limitation, debounce time

UP 255D21 KNX Brightness Sensor with Constant Light Level Controller 5WG1255-2DB21 Product Overview This KNX ceiling brightness sensor delivers precise mixed light measurement with an integrated constant light level controller for automatic daylight-harvesting dimming no separate controller needed. Mounted compactly, it measures ambient illuminance while driving one main luminaire group plus up to four additional groups at a user-defined lux setpoint. Daylight increases

N 141/21 KNX DALI-2 Gateway Twin Plus 2 Channels 128 ECG Emergency Lighting RGBW 5WG1141-1AB21 This KNX/DALI gateway twin plus offers two independent DALI channels, each supporting up to 64 electronic control gears for a total of 128 devices across 32 groups. Both channels are DALI-2 certified per IEC 62386-101 and 103 standards. Technical Specifications DALI Channels 2 independent channels Device Capacity 64 devices per channel (128 total) Group Support 32 groups total

US/U 4.2 ABB Universal Interface 4-Fold Binary Input for Scanning Voltage Floating Contacts KNX Product Overview The US/U 4.2 is a professional-grade component of the ABB i-bus KNX smart building ecosystem, engineered to deliver exceptional reliability, energy efficiency, and operational scalability for modern intelligent infrastructure. As part of the globally recognized Binary Input series, this device represents the convergence of high-performance hardware design and

Quick Purchase Information Item Details Brand Schneider Electric Product Range SpaceLogic KNX / KNX system Model MTN648493 Product Type KNX Switch Actuator Product Name Switch actuator REG-K/12x230/16 with manual mode Rated Application KNX lighting control and switchable load control Installation DIN rail / REG-K cabinet installation Common Projects Hotel, villa, office, commercial building, public area lighting Documents Datasheet / operating instructions available on

DLR/S 8.16.1M ABB MDRC Industrial DALI Dimmer - 8-Fold Manual Dimming Control The DLR/S 8.16.1M is an industrial-grade 8-channel independent DALI dimming actuator from the ABB MDRC professional building automation series. Designed for KNX/EIB and DALI digital lighting systems, it features dual control modes with on-site manual operation and system intelligent control capabilities. Technical Specifications Model: DLR/S 8.16.1M - ABB MDRC Series Channels: 8 independent DALI

UP 562S32 KNX Switch/Solar Actuator 2xAC 230V 16A 3 Binary Inputs Flush Mount 5WG1562-2SB32 The KNX switch and solar protection actuator is a flush-mounted 2-channel device for controlling lighting and sun protection in smart buildings. Each output provides one relay contact rated for AC 230 V, with a combined rated current of 16 A across both channels. Three binary inputs for potential-free contacts allow local switching status detection and direct output operation, with an

5WG1285-2DB42 KNX Pushbutton Single No Status LED Platinum Metallic DELTA Style UP 285/42 Product Overview The 5WG1285-2DB42 (UP 285/42) delivers single-channel KNX pushbutton control in the premium platinum metallic finish within the classic DELTA style format. The soft platinum sheen complements contemporary and luxury interiors warm-toned stone, natural timber, and brushed metal fixtures without the industrial feel of aluminium. No status LED keeps the faceplate