LR/S 2.16.1 ABB i-bus KNX 2-Channel Light Controller DIN Rail 1-10V 16 A Constant Lighting Control Unit

Product Summary
LR/S 2.16.1 ABB i-bus KNX 2-Channel Light Controller DIN Rail 1-10V 16 A Constant Lighting Control Unit PRODUCT SUMMARY Constant illuminance regulation is what separates the ABB i-bus KNX LR/S 2.16.1 from an ordinary dimming actuator. This two-channel modular DIN-rail unit switches and regulates two ...
Basic Properties
Brand Name: ABB
Certification: CE
Model Number: LR/S 2.16.1
Trading Properties
Minimum Order Quantity: 5
Payment Terms: T/T
Product Description

LR/S 2.16.1 ABB i-bus KNX 2-Channel Light Controller DIN Rail 1-10V 16 A Constant Lighting Control Unit

PRODUCT SUMMARY

Constant illuminance regulation is what separates the ABB i-bus KNX LR/S 2.16.1 from an ordinary dimming actuator. This two-channel modular DIN-rail unit switches and regulates two groups of luminaires equipped with electronic ballast gear and 1-10 V inputs; once the light sensor LF/U 2.1 is wired to its sensor input, the device compares measured room brightness with the configured setpoint and continuously trims the 1-10 V signal, holding the illuminance steady as daylight changes. Up to two sensors may be linked to the controller, one per regulated circuit, for precise detection of the lighting conditions in each part of the room. Order code 2CDG110087R0011, light grey, 0.2 kg.

FULL SPECIFICATIONS

Bus system KNX TP1 twisted-pair line, S-Mode
Channel configuration 2 channels, each with a 1-10 V output and a floating relay contact
Sensor connection up to two LF/U 2.1 sensors, one per regulated circuit
Mains voltage 110...230 V AC, switched output 230 V AC, 50/60 Hz
Contact rating per channel 16 A (AC1)
Control current 100 mA DC maximum
Supported load 1-10 V electronic ballast gear
On-device control yes, with status display
Heat dissipation 2.6 W
Climate & housing -5...+45 °C ambient, IP20, 4 MW, 72 x 90 x 64.5 mm
Standards & approvals CE, RoHS, REACH, KNX certified

TYPICAL APPLICATIONS

Chosen for single offices, meeting rooms, corridors and classrooms with two lighting groups where energy rules call for automatic brightness regulation.

Product Details
Highlight:

ABB i-bus KNX 2-channel dimming actuator

,

DIN rail lighting control unit 16A

,

1-10V constant lighting controller

Mounting: Flush-mounted In Standard Wall Box
Responsetime: Less Than 100ms
Protection: Electrical Isolation Between Segments
Dimmingtype: Leading Edge / Trailing Edge
Control Signal Type: 0-10V Analog Signal Output
Material: Flame-retardant Plastic
Output Type: Relay Output

Ms. Nora

Sales Manager

Related Products
Send an Inquiry