knx hybrid actuator

UD/S 6.315.2.1 ABB Universal Dim Actuator 6-Fold 315 VA Enterprise Power Dimming Management KNX Product Overview The UD/S 6.315.2.1 is a high-performance modular component of the ABB i-bus KNX building automation system, designed to provide exceptional reliability, energy efficiency, and operational scalability for modern intelligent infrastructure. As part of the globally recognized Dimming Actuator range, this device represents the integration of advanced engineering

N 262D31 KNX Binary Input Module 4x Dry Contacts DIN Rail LED Status Display 5WG1262-1DB31 The KNX binary input module offers four dry contact inputs for capturing potential-free switching states in building automation systems. Each input provides direct operation capability on the device front, with LED status indication and a button to deactivate direct mode. Maintenance-free terminals allow connection and through-wiring of untreated single-core, stranded, or multi-core

N 543D31 KNX Solar Protection Actuator 4xAC 230V 6A with End Position Detection 5WG1543-1DB31 The N 543D31 KNX solar protection actuator provides four-channel control of AC 230 V sunblind, shutter, and awning drives in intelligent building systems. Each channel is rated for 6 A and features end position detection to verify upper and lower travel limits. Two interlocked relays per channel reverse output polarity for up and down movement, while dual status LEDs indicate travel

UD/S 2.315.2.1 ABB Universal Dimming Actuator 2-Fold 315 VA Optimized for LEDi and Conventional Loads KNX Product Overview The UD/S 2.315.2.1 is a high-performance modular component of the ABB i-bus KNX building automation system, designed to provide exceptional reliability, energy efficiency, and operational scalability for modern intelligent infrastructure. As part of the globally recognized Dimming Actuator range, this device represents the integration of advanced

5WG1258-2DB53 KNX Presence Detector WIDE multi PIR Lux Temp RH CO2 Black Product Overview The 5WG1258-2DB53 (UP 258D53) is the flagship WIDE multi presence detector, offering a comprehensive sensor suite in a single ceiling-mounted device. This advanced detector combines PIR presence/motion detection, brightness, temperature, relative humidity, and CO concentration measurement five critical environmental parameters for complete building automation. Designed for indoor

5WG1222-2DB33 KNX Pushbutton Double With Status LED Aluminum Metallic i-System UP 222/33 Product Overview The 5WG1222-2DB33 (UP 222/33) combines premium aluminum metallic finish with double-gang KNX pushbutton capability and integrated status LEDs. Two horizontally arranged rocker pairs deliver independent two-channel KNX control, while the LEDs provide per-channel state feedback and low-light orientation. The aluminum-look surface complements contemporary architectural

UP 511S32 KNX Universal Switch Actuator 1xAC 230V 16A with 3 Binary Inputs Flush Mount 5WG1511-2SB32 The KNX universal switch actuator is a compact 1-channel device designed for mounting in appliance boxes according to DIN 49073 or in the M 592/01 mounting case. It provides one relay contact rated at AC 230 V and 16 A, suitable for controlling lighting, heating, or other single-phase loads. The unit includes three binary inputs for potential-free contacts, allowing direct

N 146/03 KNX Secure IP Router 5 Tunneling Lines Areas Ethernet RJ45 PoE IP20 5WG1146-1AB03 Product Overview The N 146/03 KNX IP router routes KNX telegrams between bus lines, areas, or systems over a standard Ethernet network while encrypting traffic with KNXnet/IP Secure. It can operate as a line coupler, area coupler, or system coupler, suiting projects from single buildings to multi-building campuses. Up to five simultaneous tunneling connections support parallel ETS

N 536D51 KNX Switch Dim Actuator 8x AC 230V 10AX 1-10V Output Relay DIN Rail 5WG1536-1DB51 This KNX switch/dim actuator offers eight relay outputs for AC 230 V, 10 AX loads, each paired with a 1...10 V DC control voltage output for analogue dimming of electronic ballasts and LED drivers. Technical Specifications Output Channels 8 relay outputs Load Capacity AC 230 V, 10 AX per channel Dimming Control 1...10 V DC output per channel Rated Contact Current 16 A per channel