Français
Deutsch
Italiano
Русский
Español
Português
Nederlandse
Ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
Indonesia
Tiếng Việt
ไทย
বাংলা
فارسی
Polski
N 141/03 5WG1141-1AB03 KNX DALI Gateway Plus 1 Line 64 Ballasts Constant Light Emergency
Product Summary
N 141/03 5WG1141-1AB03 KNX DALI Gateway Plus 1 Line 64 Ballasts Constant Light Emergency N141/03 is the one-line member of plus-class KNX/DALI gateways. It harnesses everything the plus generation can do, but only channel A is populated, which keeps the price down where a single, well-loaded DALI ...
Basic Properties
Certification:
CE
Model Number:
N 141/03
Trading Properties
Minimum Order Quantity:
5
Payment Terms:
T/T
Product Description
N 141/03 5WG1141-1AB03 KNX DALI Gateway Plus 1 Line 64 Ballasts Constant Light Emergency
N141/03 is the one-line member of plus-class KNX/DALI gateways. It harnesses everything the plus generation can do, but only channel A is populated, which keeps the price down where a single, well-loaded DALI line is sufficient. Regulated lighting duties, including emergency luminaires that must be tested and logged, are therefore achievable without investing in a two-line device.
Product Summary
The N141/03 KNX DALI Gateway Plus is a single-line solution designed for efficient and cost-effective lighting control in industrial and commercial settings. It supports up to 64 DALI control gear units, offering advanced features like constant light control, emergency lighting management with logging, and bidirectional DALI communication for fault reporting. Ideal for medium-sized installations or specific zones within larger buildings, it provides a robust platform for modern lighting automation.
Technical Specifications
| Protocol and Line Capacity | KNX TP1 gateway with one DALI interface to IEC 60929, addressing up to 64 DALI control gear units on the line. DALI traffic is bidirectional, reporting failed lamps or defective ballasts back into the KNX network. |
|---|---|
| Scope Limitation | All functions act on channel A only; function blocks belonging to a second channel are absent. Application number 983711, firmware V15, ETS 5 or above. |
| Supply | Internal power supply with 110-240 V AC or 120-240 V DC input feeds gateway electronics and generates DALI bus voltage, eliminating the need for a separate DALI supply on the line. |
| Local Handling | An LC display shows the operating state. A front key toggles between bus mode and direct mode, allowing switching and dimming of every luminaire without ETS data or KNX communication in direct mode. |
| Sensor Parameters | Supports and parameterizes selected DALI sensors in the ETS project, including pushbutton couplers and DALI presence or brightness sensors. Up to 16 pushbutton inputs and 8 presence detectors can be registered per channel, all energized over the DALI line. |
| Emergency and Compliance Blocks | Emergency mode is triggered by a configurable number of failing DALI ballasts. Emergency lighting tests can be recorded. An inhibit mode prevents self-contained emergency luminaires from entering battery operation when a button is pressed. A lock object suppresses failure messages during deliberate ballast interruption for testing. |
| Lighting Control | Closed-loop constant light control and two-point light control, one- and two-level timer operation, effect control, minimum and maximum dimming values, conversion of dimming commands into temporary setpoint changes for ballasts with integrated light-level control, sixteen scenes on the line, broadcast, group and individual addressing, and burn-in routines for the whole system or via object. |
| Diagnostics and Maintenance | Group and device level status and fault reporting, including DALI device failure, supply failure, and DALI short circuit. A defective ballast can be exchanged without software configuration, as the gateway transfers the configuration of the failed device to a new one of the same type. The bus coupling unit occupies only half a standard bus load, and the housing is a rail-mounted unit for distribution boards. |
Application Scenarios
- Medium-sized buildings or defined zones of larger ones, such as a hotel floor, a school wing, a hospital department, an office level, a museum gallery, or a retail floor.
- Projects requiring documentation of emergency lighting tests, which benefit significantly from its logging capabilities.
- Installations where DALI sensors can be used for local presence and daylight control on the lighting line, especially when KNX sensor wiring would be complex or awkward.
Product Details
Highlight:
KNX DALI Gateway Plus 64 Ballasts
,DALI Gateway Constant Light Emergency
,Dimming Actuator KNX DALI 1 Line
Ms. Nora
Sales Manager
- Email: nora@knxcomponents.com
- Tel: +8613427540176
- WhatsApp: 8613427540176
-
WeChat:
+8613427540176
Related Products
-
NP16212_01SL Schneider Unica Range KNX Wall Station Five Keys Silver plus Thermostat Display Screen Panel
Product Overview The NP16212_01SL is the combined Unica KNX push button and room thermostat in the silver finish — the neutral grey silver that allows the device to be repeated across many rooms without becoming a design feature. The plate carries five operating buttons with status indicators and a ... -
NP16163_01WG Schneider Unica Range KNX Wall Station with Six Keys Wine Gold Status LEDs Bus Coupler
Product Overview The NP16163_01WG is a six-key wall station in the Unica KNX range, supplied in the wine gold finish that Schneider Electric uses for interiors where the control point is expected to match warm metal fittings. Six keys on a single 86 mm plate is the key count at which a wall device ... -
MTN6710-0102S Schneider SpaceLogic KNX Multi Phase Dimming Master Two Way Secure 230V White 7.5mA Unit
MTN6710-0102S Schneider SpaceLogic KNX Multi Phase Dimming Master Two Way Secure 230V White 7.5mA Unit The MTN6710-0102S is the SpaceLogic KNX universal dimming master, a two channel device in a white enclosure that sits at the centre of the SpaceLogic universal dimming architecture rather than at ...
